Sale Price: $229

USB-30 mp3 On Hold Player

The USB-30 Digital mp3 Music On Hold Player plays mp3 files into your telephone equipment so callers on hold will hear high quality audio marketing messages. When you use the mp3 digital player, you can receive files via email and easily load onto the USB drive (included) for use on-hold. The set up and operation is quick and easy, as you will see in the video, below.

 

View Video: USB-30 Message On Hold System

 

USB-30 Stats

USB30: USB Drive-Based Digital Message System

  • LED Indicator: Green Light Status LED
  • Message Loading: MOH Drive
  • Memory Type: Non-Volatile USB Flash
  • Memory Capacity: 32 Megabytes
  • Sampling Rate: 8K to 256K Auto Detected By Player
  • Maximum Files: Up To 60 MP3 Files
  • File Play List Chain: Up To 60 Files To Play In Sequence.
  • Message Playback: Continuous or Trigger Controlled
  • Output Volume: Continuously Variable
  • Dual Audio Outputs: 600 Ohm Line Level – 8 Ohm 3 Watt
  • Power Supply: 120VAC 60Hz to 12VDC @ 500mA
  • Mounting: Wall Mounting Included
  • Test Speaker: Built In With Push On/Off Switch
  • Dimensions: 5.8W X 1.7H X 5.2L Inches
  • Weight: 2.3 Pounds Including Power Supply And Packaging

1) Plug in on-hold message player to the AC outlet.
2) Connect the audio cable from the "Output" jack of the digital message player to the MOH input on the main telephone jack. If your telephone system does not have an MOH jack, you may have one provided by a competent telephone technician.
3) Operate the message player according to intstructions.
4) Check audio level and adjust if necessary.

 

Analog Phone System

If your phone is not part of a system, you are likely using an analog line (provided by your local telephone company). If this is the case, order the Skutch Adapter made for you phone brand and model. Call Easy On Hold for help locating the correct adapter. This adapter will activate the hold button on your phone, allowing the caller to hear your message, but does not play audio directly. Your hold music message audio plays from an external player, such as our Messager player, into the phones via your Skutch adapter.

 

Connecting the Music On-Hold Adapter for Analog Phones:

 

Easy On Hold: Analog Diagram

1) Plug in the Music On Hold player and Skutch Adapter into an AC outlet. 2) Run your phone line from the wall jack, into the adapter, then into your phone. 3) Connect the audio cable from the Message On Hold Player into the adapter.